jewelry beads wholesale china What are the processes of gift box production?

silver n accessories wholesale jewelry manufacturers 认 Determine the design draft, confirm the sample, and place an order. Schedule production materials (noodles, fences, inside stickers, bottom paper, cardboard or density board, inner support material, etc.). Printing bag paper and inside stickers (need to print handbags with supporting handbags), and make the post -work process (covering film, crushing, over -UV, bleeding, convex pressure concave, mold and other processes according to needs), box Open ingredients: Paper, printed noodles, inside stickers, panels, fences, and inner trunk cutters of gray cardboard materials to cut into the established size (density board requires professional large saws), panel processing of panel processing, panel processing : V grooves open V groove, sticky sheet, enclosure processing: punching machine diamond magnet hole. Inner trees processing: The inner bent plate needs to cut the ash plate and then stick the cut silk cloth. The inner bent for the foam need to put the tailored silk cloth on the forming foam. Pay attention to the surface of the paper, and the side should be packed), stickers inside, and mount the fence (at the same time you need to put magnets). The box assembly (you can choose the glue method according to the material: the gel and the glue of the gel gun are used for assembly. Pay attention to keeping the box clean when assembling to avoid leakage of glue and affect the appearance.) (Pay attention to keeping the box clean), put the inner bent (the internal bearing in the upper and lower asymmetry should be distinguished), wipe the box, and install it (the box production process takes a period of time. ) The difference between the production of the heavenly cover box and the book -type box is: The panel of the bag is divided into the front face, top, back face, bottom, bottom, and the panel is wrapped in the box. Form box.
The heavens and the earth cover the box, the upper cover is separated from the bottom (except for the upper and lower lids of the one). Fixed and dry with white latex. (The upper and lower lids of the gray cardboard material can open the "well" V slice. After removing the four corners, use the tape directly to fix it), and mount the processing paper on the upper cover and bottom. The assembly of the upper lid with the bottom buckle is completed (the upper and lower cover box needs to be connected to the upper and lower lids with the connection of the upper and lower lids). Put the inner bent, wipe the box, pack.

wholesale sublimation jewelry blanks Common packaging materials are PET, VMPET, KPET, matte PET, OPP, pearl OPP, matte OPP and other materials. These are mostly used for conventional product packaging. BOPA and AL are generally used in high -end packaging. They are ordinary in ordinary packaging. Not much use in packaging. Paper materials generally include ash whiteboard paper, white -bottomed whiteboard paper, double -sided coating white cards, etc., and a low -corrugated one. The strength of the carton it produced is higher than that of other paper boxes. Three major sections of composite, dry composite, and extruded composite, which are mainstream in dry composite. Food materials are mostly transparent water -resistant and high -resistance packaging bags. It is generally divided into two layers of structure (KPA/PE) and three -layer structured cardboard according to the product component. Press printing, hot silver/gold, windows, film, and so on.